2000 Slimline Litre Steel Bunded Oil Tank

This 2,000 litre slimline steel bunded oil tank is a UK-manufactured double-skinned storage solution for heating oil, diesel and gas oil. The inner tank contains the fuel while the outer steel bund provides integral secondary containment designed to hold a minimum of 110% of the stated tank capacity.

With approximate overall dimensions of 2000 x 965 x 1220 mm, this tank provides a robust steel storage option for replacement and new installations. Its 965 mm width provides a space-efficient footprint where available installation width is restricted.

What Is a Steel Bunded Oil Tank?

A steel bunded oil tank uses a tank-within-a-tank design. The inner tank stores the fuel while the outer steel bund provides secondary containment if the inner tank leaks, helping reduce the risk of fuel reaching the surrounding environment.

Construction and Design

This model is fabricated in steel and made to order in the United Kingdom. Standard connections include fill, vent and bottom-outlet provision, with lifting and internal bracing appropriate to the tank design. The standard finish is Holly Bush Green (RAL 14C39), with alternative colours available by quotation.

Who This Tank Is Ideal For

• Heating-oil installations requiring robust steel construction
• Replacement or new installations needing approximately 2,000 litres of storage
• Sites requiring integral secondary containment
• Properties where a narrower tank footprint is advantageous

Key Features

• 2,000 Litre Capacity: Nominal storage capacity for heating oil and compatible fuels.
• Steel Bunded Construction: Inner storage tank protected by an integral outer bund.
• 110% Minimum Bund Capacity: Secondary containment around the inner tank.
• UK Manufactured: Made to order in the United Kingdom.
• 10 Year Guarantee: Manufacturer guarantee for bunded tanks, subject to applicable conditions.

Tank Specifications

*Dimensions, capacities and weights are approximate. Manufacturer guarantee is subject to applicable installation, use and maintenance conditions.

Delivery and Access

Estimated delivery is approximately 2–4 weeks. Standard delivery is normally kerbside using tail-lift offloading. The customer is responsible for moving the tank from the kerbside delivery point to its final position.

• Delivery is normally advised around 48 hours in advance.
• Standard deliveries are typically Monday to Friday between 9am and 5pm.
• Please ensure suitable delivery-vehicle access and a safe unloading area.
• Specific-day, AM/PM and HIAB delivery may be available at additional cost.
• Some postcode areas require a bespoke delivery quotation.
• Remove protective wrapping promptly after delivery to help protect the painted finish.

Installation, Maintenance and Guarantee

The tank should be installed on a level, load-bearing base suitable for the combined weight of the tank and its contents. General guidance recommends a concrete, paving-stone or stonework base extending at least 300 mm beyond the tank on all sides.

Installation requirements vary by site, so the final installation should follow current regulations and guidance and be completed by a suitably qualified installer.

Steel tanks should be inspected regularly and maintained to protect the coating. Manufacturer guidance recommends periodic repainting with a suitable protective coating, approximately every 18 months.

Do not arrange installation work or a fuel delivery until the tank has arrived and been checked.

Optional Extras

• Channel runners
• Clock contents gauge
• Outlet kit
• Alternative paint colours by quotation